Visit Lombok, Indonesia

In February 2011, I visited Lombok, Indonesia, to recce for possible community projects for the local community; to meet with local staff to discuss scope of projects and make necessary arrangements to accomodation for future trips.

We visited Lebuan Pandan and viewed a demonstration farm plot which is experimenting drip irrigation farming.

Next, we visited  Rembitan where a Sasak couple who provides Batik making skills training for young people in an Art Gallery. We discussed possible projects such as building vats for dyeing and washing of batik and teaching of conversational English.

Finally we visited Senaru to discussed possible projects in surrounding villages including building of volleyball court, particiapting in a biogas project and accomodation at a traditional house.

Sai Ngam Church and Community

On December 2010, a team went to Sai Ngam,  Thailand, to replace a faulty inverter for the solar lighting at Sai Ngam's church. The faulty inverter's cooling fan died and causes over-heating on the inverter. The new inverter does not require cooling fan to operate, hence it is expected to be more reliable.

Now both churches at Sai Ngam and Nam Plamoong uses the same inverters, i.e. without cooling fan. We will continue to monitor the reliability of these inverters so that if found reliable, we will use them at other installations.

In addition, the team also identified 5 houses at Sai Ngam village without lights at night. Their solar powered lights have broken down and they uses candle lights at night. It is a fire hazard when they use the candle lights. 

We have design a simple rechargable battery operated LED lamp which uses their existing solar panels to charge the rechargable battery during the day.

 The lamps have a red LED indicator to show that during the day, the sun is charging the battery. The lamp is connected to a switch mounted on the wall for ease of switching "ON/OFF" the lamp at night.

 The lamp is a low power LED (100mW), which is brighter than a candle light. The 5 houses are installed with these lamps. Each house is given 2 lamps which provides sufficient lighting for them to see and walk around the house at night.

Lamp Specifications:
LED 100 mW
1 AA Metal Hydride Rechargable Battery, 1.2V at 2700 mA-Hour
A single Full Charge able to operate 18 hours.

Industrial Training Skills at PKH

On October 2010, I visited Project Khmer Hope (PKH) at Kg Speu, Cambodia, again for 4 days to see the progress of the Industrial Skill training. It is a 9 months full-time course. The training is progressing well and the 23 students have completed almost three quarter of the training.



English Lessons at Night



  

The topics that they have completed are:

1. Technical Drawing
2. Basic Electrical Wiring Skills
3. Fundamental Mechanical Hand Skills
4. Maintenance of Mechanical Machines
5. Aircondition System Maintenance & Repair (Split Unit)   
6. Maintenance of Refrigeration System

 

Welding Project



Metal Work Project

The last training programme will be Basic Carpentry, Masonry and Plumbing which they will complete by the end of the year. As a team project, they have constructed a dining chair and concrete bench.

  

Dinning Chair (Carpentry Work)



After they have completed the technical training, the students will undergo a short introductory lessons to prepare them for the hospitality industry. They can then work as maintenance technicians in the hotel industry.

   

Masonry Work (Concrete Bench)



The students are also taught about the 5S systems which is generally accepted by industry. It is about improving quality, reducing costs, and improving safety which are all key concerns for anyone who works for a manufacturing company or other organization. Many companies implement lean manufacturing in order to reduce excess wastes that occur within a company. They will learn the 5 concepts, namely:

1. Sort
2. Set in Order
3. Shine
4. Standardize
5. Sustain

Currently they are in the process of improving their Tools and Store room by having a proper inventory system with a proper sign in/out records system. We hope to see this implemented in 6 months time.


<><><><>

<> </>

</></></></> <><><><>

</></></></>

Store Room



Tool Room







Light The Way - Nam Plamoong and Omkoi

On Friday, 30 April 2010, we went on a 6 day mission trip to visit churches in Thailand at Nam Plamoong and Omkoi.

We reached Chiang Mai airport, we did all our purchase for the solar lighting project and travel for 3 hours on a winding road (762 curves) to reach Pai. We rested for the night and early next morning, we set off to Nam Plamoong on dirt road using a 4 wheel drive to go up the mountain top to reach Nam Plamoong. Behind the trees, you can see the distant village, which is Nam Plamoong. The people in this village are from the Lisu hill-tribes.

After 2 hours of travelling, we arrived at the church at Nam Plamoong . The church.which is situated on a mountain top, is 1180 meters above sea-level. The church is managed by a Lay Reader, who is a member of the Lisu tribe. A picture of him and his daughter.

We spent 2 days installing the solar lighting for the church. The weather was hot during this period. It was lichee season.

The system comprises of 2 photovoltaic panels (Sharp 130W) connected in parallel to give a total of 260W operating at 12Vdc. The panels are mounted on 4 tree trucks which are used as support and faces south where the sun shine from morning to evening. For energy storage, it uses GEL deep cycle battery, 200 AH, and operates at 20% depth of discharge. This should last the battery for 3 to 4 years of operation as it is only used for lighting purposes. The brand of the charge controller and inverter are from Morningstar. The 300W inverter does not require a fan for cooling, hence is is very reliable. There are main circuit breakers and earth leakage circuit breaker in the system to ensure the safe operation. An earthing rod of 2 meter length is hammered into the ground to provide earthing.

Specifications


Compact Fluorescent Lamps, 11W - 7pcs
Daily Usage - 6 hours nightly
Solar Modules, Sharp 130W - 2 pieces
Battery, 3K Lead Acid Deep Cycle, GEL, 12V 200A-H - 1 pcs
Charge Controller, Morningstar, Pro Star 30M - 1 pcs
Morningstar SureSine Inverter-300 watt, 220volt,50Hz - 1 pcs
AC Operation – 230Vac 50Hz
Maximum Depth Cycle Discharge – 20%
Battery Reserve - 1 Day Storage
Earthing Protection


Finally, the system was up and running, a total of 7 CFL lamps of 12 watts each were installed in the church. 6 lamps were mounted inside the church and 1 lamp outside at the entrance. This should provide adequate lighting for the church at night.

As usual, we have cooked meals for lunch.

After the project, we travel back to Chiang Mai and rested for the night.
Early next morning, we travel to Omkoi by road for 4 hours, it is located south south west from Chiang Mai.. The people are from the Karen hill-tribes.

We visited the church and we had lunch with the pastor at his house.

After that we went back to Chiang Mai and headed home.

Solar 6 at Hope Training Centre, Prey Veng

On 6 April 2010, we went to Hope Training Centre, Prey Veng, to restore the solar lighting and also conduct solar maintenance at the training centre. The condition of the wiring and lamps needed restoration because during the construction of the building, some were damaged.

 

We dug a new trench to provide electrical cabling from the factory to the 6 houses. This will provide the solar battery power located at the factory to the houses.

We also rewire the electrical cables and lamps at the factory

The lamps, charge controller and batteries were located at the factory. There are 2 zones, houses for zone 1 and factory is zone 2. A total of 17 lamps or 85Watts of power is consumed by the security lighting nightly. The security guard will switch on the lights when it gets dark, about 6.30pm and turn off the lights at 6 am the next morning. A total of 6 solar panels totaling 660Watts is capable of providing 12 hours nightly of security lighting. It has a standby charge of 2 days in case of bad weather with no or little charging from the sun. It has the capacity to increase to 22 lamps without compromising its performance.

A picture of the factory during the day time and night time. It provide sufficient lighting at night to improve the security in the training centre.

The daily charging of the batteries starts at 6 am in the morning and reaches full charge at noon. The charging goes into trickle charge after that. At 6.30pm, the lights are turn on for 12 hours where we can see the batteries are being discharge.The cycle continues again the next day.

A block diagram of the system is shown below.

Light The Way Training

We have formed a team to provide lighting to the remote churches who do not have access to grid electricity. The team is undergoing training such as electrical installation, how the photovoltaic system generate electricity for rural lighting.

Industrial Skill Training

On 18 March 2010, I went with a group of friends to PKH, Kg Speu, Cambodia, to assist in the training of industrial skills to the Cambodian youths. We taught them basic technical drawing, electricity and english.

Below are the 2 Cambodian instructors for the industrial skill training.

The workshop is currently being build, the contractor is putting the thermal insulation on the roof.